top of page
How to install your Lights
New Installation
Must be carried out by a Licenced Electrician
Existing Installation
See below
Click on video or see description below
​Ceiling Light
​
-
Make sure Light switch is turned off.
-
Remove Globe from existing Batten holder
-
Unscrew skirt on Batten Holder.
-
Place new Housing onto batten holder thread and screw skirt back into place, making sure that the skirt rotates at least 3 times until just finger tight. Turn Skirt back slightly (maximum 1/8 turn) so that the housing can move freely on the thread.
-
Fit Bezel over PAR globe and insert into batten holder. You may need to adjust the globe or the housing slightly to enable the bezel to sit correctly.
-
Turn on switch to test.
​Pendant Light
​
-
Unscrew skirt on Cord lamp Holder.
-
Place new Housing onto Lamp holder thread and screw skirt back into place, making sure that the skirt rotates at least 3 times until just finger tight. Turn Skirt back slightly (maximum 1/8 turn) so that the housing can move freely on the thread.
-
Fit Bezel over PAR globe and insert into Lamp holder. You may need to adjust the globe or the housing slightly to enable the bezel to sit correctly.
-
Remove Globe from existing Batten Holder.
-
Fit Cord bayonet plug to Batten Holder, place cover and adjust cord grip.
Batten Holder
Housing
Skirt
Bezel
PAR globe
Batten Holder
Cord Bayonet plug
Cover
Cord Lamp Holder
Skirt
Housing
Bezel
PAR globe
bottom of page